puyunsm@outlook.com +86 158 6761 1153
ISO 9001BSCI AuditedFood-Grade LicensedOEM / ODM
Published 2026-11-06

Exporting plastic drinkware and lunch boxes to Japan: Food Sanitation Act, positive list and quality labels

Japan checks plastic drinkware three times: the material under the Food Sanitation Act, the shipment at the quarantine station, and the label on the shelf. Each check belongs to someone different, and most problems come from not knowing who.

Sample display shelves
Sample display shelves

Three checks, three owners

What Japan checks on plastic food-contact products
CheckWhat it coversWho is responsible
Food Sanitation Act: positive listEvery substance in a synthetic resin that touches food must be on the positive listThe resin maker and the product manufacturer, with the information passed down the chain
Import notificationEach shipment of food apparatus or containers for sale is notified to the quarantine station, with test reports where requiredThe importer
Quality labelResin type, heat resistance, capacity and care notes on the product or the packWhoever labels the product: manufacturer, seller or labelling company

The positive list: only listed substances

Since 1 June 2020, synthetic resins used in food apparatus and containers in Japan may contain only substances that are individually listed on the positive list. The transition period ended on 31 May 2025, so every product on sale now has to comply. The system is run by the Consumer Affairs Agency.

In practice the evidence starts with the resin. A Japanese importer will ask for confirmation that the resin and the colourant comply, and that information is passed from the resin maker to the product manufacturer and on to the importer.

  • Ask the resin supplier for positive-list information for the grade you use.
  • Include the masterbatch: the colourant is part of the material that touches food.
  • Keep the documents with the model and colour, so a repeat order can use the same file.

We ask for the resin maker's test report with every resin purchase, so the documents for each grade are on file when an importer asks.

Import notification and test reports

Food apparatus and containers imported for sale have to be notified to the quarantine station by the importer; without the notification they cannot be sold. Where the product falls under a specification, the notification includes a test report — from an overseas official laboratory or from a registered laboratory in Japan.

Repeat imports are simpler. After a first import with a test report, inspection can be skipped for a period for the same product, and an item registration for apparatus and containers stays valid as long as the manufacturer, the material, the colourant and the manufacturing method do not change.

  • Agree with your importer which laboratory's report they will use before you place the order.
  • Treat a new colour or a new masterbatch as a change to the colourant, and ask your importer whether it needs a new test or registration.
  • Allow time for the report: our Food Sanitation Act test reports come from SGS and take about half a month.

The quality label: resin, heat resistance, capacity

Under the Household Goods Quality Labeling Act, plastic tableware and kitchenware sold in Japan carries a quality label. What it must show depends on the product:

Label items under Japan's labelling rule for synthetic-resin products
ProductMust show
Water bottlesResin type, heat resistance, capacity, care notes
Cups, plates, lunch boxes, food seal containersResin type, heat resistance, care notes
Lidded containers, refrigerator jugs, sealed drink containersResin type, heat resistance, cold resistance, capacity, care notes

The label also names whoever labelled the product, with an address or a telephone number.

  • Heat resistance is tested by the JIS S2029 method: the temperature at which the product stops working properly or deforms noticeably, minus 10 °C. Cold resistance is the failure temperature plus 10 °C. Testing outside Japan is accepted if it follows JIS S2029.
  • Each part in a different resin is named — a polyethylene lunch box with an elastomer seal on the lid lists both.
  • Capacity has a tolerance: +10% to −4% in general, ±5% for water bottles.

We print Japanese labels and colour boxes to your artwork regularly. The heat-resistance figure on them must come from a JIS S2029 test of that model — agree who runs it before the artwork is final.

A checklist before you order

  • The resin grade and the masterbatch for each part, with positive-list information from the suppliers.
  • The laboratory and the test your importer will use for the notification.
  • Who runs the JIS S2029 heat-resistance test, and the figure for the label.
  • The label text in Japanese, with the resin of every part and the labeller's name and contact.
  • A new colour treated as a change: ask your importer before you approve it.

Our article on what Japanese buyers check covers the quality side of the same order.

All insights

Send us a drawing, a sample, or just a reference photo

We will come back with feasibility, tooling cost and a production timeline in your language, within one working day.